You're in:
28 port Gigabit Managed "Green" switch with 24 port 100/1000 Mbps SFP fixed configuration and 4 additional 100/1000 Mbps SFP ports in combination with 10/100/1000T ports.
The AT-9000/28 is a 28 port managed Gigabit Ethernet switch that is ideally suited for the enterprise environment. This cost-effective switch has a 1RU form factor, and four SFP combo bays. It supports key features such as such as link aggregation, VLANs, QoS and 802.1x security.
|
| Technical details |
| Memory |
| Internal memory | 128MB |
| Flash memory | 16MB |
| Connectivity |
| Ports quantity | 28 |
| Connectivity technology | Wired |
| SFP ports quantity | 28 |
| Weight & dimensions |
| Dimensions W x D x H | 440 x 256 x 44mm |
| Weight | 4010g |
| Stackable | N |
| Energy management |
| Power consumption | 37.42W |
| Power over Ethernet (PoE) Support | N |
| Power requirements | 100 - 240V AC, 50/60Hz, 1A |
| Heat dissipation | 127.768BTU/h |
| Environmental conditions |
| Operating relative humidity range | 5 - 90% |
| Operating temperature range (T-T) | 0 - 40°C |
| Storage temperature range (T-T) | -25 - 70°C |
| Storage relative humidity range | 5 - 95% |
| Endurance |
| Mean time between failures (MTBF) | 340000h |
| Protocols |
| Management protocols | WEB, CLI, SNMP |
| Networking |
| Address table size | 8000entries |
| Sound emission |
| Noise level | 41.7dB |
| Data transmission |
| Maximum data transfer rate | 1Gbit/s |
| Full duplex | Y |
| Supported data transfer rates | 10Mbps, 100Mbps, 1000Mbps |
| Security |
| MAC address filtering | Y |
| Certificates |
| Compliance industry standards | IEEE802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3z/ab, IEEE 802.3x, IEEE 802.1p, IEEE 802.1x, IEEE 802.1d, IEEE 802.3ad, IEEE 802.1Q |
| Safety | UL 60950, EN 60950-1 |
| Illumination/Alarms |
| Power LED | Y |
| Management features |
| Switch type | Managed |
| Switch layer | L2 |
| Quality of Service (QoS) support | Y |
There are currently no reviews. Why not write one?
NOTE: Reviews may require prior approval before they will be displayed